We're always available at: addac [at] addacsystem [dot] com © 2023 addacsystem.com
Price: 80.00 €

Description

Description

While we were working on our new VC Stompboxes we tested several expression pedals and it became clear to us that most often, while playing a modular system, our hands are busy, cables around our neck, some between our teeth and still our feet are normally free.
It's also kinda normal to have an expression pedal lying around somewhere so we thought of bringing these back, clean up the dust and put them to good use.

This module allows the connection of any standard expression and sustain pedal.

The expression pedal action can be fine tuned with Range and Offset knobs. 
Range defines the voltage range (-10v, +10v).
Offset transposes the range by (-5v, +5v).
Two leds, plus and minus, monitor the CV Output
Positive and inverted output jacks.

The sustain pedal action will generate a gate signal on the gate output.
One led monitors this output.
 

The ADDAC301 also features a bus board +5V Adaptor, this provides +5V to any bus board.
It ships with an extra jumper which, if placed on the back of the module, can enable this feature.
You'll get 500mA available on the +5V.
Note: before inserting the jumper to activate the +5V delivery, make sure your busboard does not already provide it. If it is the case, do not use the jumper on the module.
 
Specs:
. Width: 4 HP 
. Depth: 4 cm
. Max current: 20mA

. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
 
 
Regarding Expression pedals:
Behringer FCV100 and Moog EP2 are the two expression pedals that we can recommend but any expression pedal with a stereo jack will work. 
Line 6 mono exp. pedals need to be hacked to be compatible. 

Note: All specifications and features are subject to change without previous notice.

Media

Media

HD Video, Fullscreen Recommended!

Custom Panel

Custom Panel

In case you're wondering: Sure! We can get you a custom coloured front panel for the ADDAC301.
It has an additional cost and takes 4 to 6 weeks to be ready.

At the moment we have standard issue stock for either Black or Red panels for this module

A custom colour panel can be done in either Green, Blue, White, Silver Gray, Yellowed Silver, and Dark or Light Bronze.

Print colour varies between Black, White, or Red, Blue and Green. We recommend lighter-tone print for darker panels, and vice-versa.

Please note: we don’t stock custom coloured panels. For every custom order we need to make a single panel order from our panel provider. This explains the panel price and lead time.

Prices shown exclude VAT, outside EU all orders are VAT free.